AirTag in interactive 3D
Loading the 3D AirTag

See InsideTrackersUpdated

How does an AirTag work?

An AirTag has no GPS and no mobile connection. It keeps sending out a small, secure Bluetooth signal, and any iPhone in Apple’s Find My network that passes by notes where it heard it and reports that location, encrypted, so only the owner sees it on a map. Close up, an Ultra Wideband chip guides the owner to it with an arrow, and a built-in speaker plays a sound. See all of it inside the AirTag above.

How it works, step by step

Follow the AirTag from the outside in. Each step is something you can see happen in the 3D view above.

  1. No GPS inside

    An AirTag carries no GPS receiver and no SIM. That is why it is small enough for a key ring and runs for more than a year on a coin cell.

  2. A Bluetooth signal

    A Bluetooth chip keeps sending out a short, secure signal. The identifier in it changes regularly, so a stranger cannot follow one tag around.

  3. Phones do the finding

    Any nearby iPhone in the Find My network that hears the signal adds its own location and sends it on, encrypted. The person carrying that phone never learns whose tag it was.

  4. Precision Finding

    In the last few meters, the Ultra Wideband chip measures the exact distance and direction. Your iPhone turns that into an arrow that leads you to it.

  5. The case is the speaker

    A copper voice coil drives a magnet mounted on the plastic body, so the AirTag itself works as the speaker. That is how something so small gets loud enough to find in a sofa.

  6. Power from a coin cell

    A standard CR2032 battery sits under the steel cover. Press the cover, turn it and swap the battery yourself.

The parts inside the AirTag

White case
The white top shell, held on with three clips and glue.
Steel cover
The polished back, which twists off to reach the battery.
CR2032 battery
A standard coin cell that lasts more than a year.
Logic board
A ring-shaped board that carries the chips.
Bluetooth chip
Sends the signal Find My devices pick up.
Ultra Wideband chip
Apple’s second-generation chip for Precision Finding.
Accelerometer
Senses when the AirTag moves.
Speaker
A voice coil and a magnet that make the AirTag’s body play a sound.
NFC coil
Lets any NFC-capable phone tap the AirTag to read its Lost Mode message.
Antennas
An antenna frame around the board for Bluetooth and Ultra Wideband.
Leather key ring
The holder in this model, with a window on each face.

AirTag questions

Straight answers about the AirTag and what happens inside it.

See inside more products
How does an AirTag work?

It sends out a Bluetooth signal that nearby iPhones in Apple’s Find My network pick up and relay, with their own location, to the owner. Up close, Ultra Wideband and a built-in speaker help find it exactly.

Does an AirTag have GPS?

No. An AirTag has no GPS and no cellular connection. Its location comes from the Apple devices around it, which is why it works almost anywhere people carry iPhones.

How does an AirTag work without cell service or Wi-Fi?

An AirTag does its part over Bluetooth. It sends out a secure Bluetooth signal that nearby devices in Apple’s Find My network can detect, and those devices send its location to iCloud, where the owner sees it on a map in the Find My app. Apple says the process is efficient, so there is no need to worry about battery life or data usage.

Does an AirTag track in real time?

An AirTag’s location on the map is updated when it connects to the Find My network, which happens when a nearby device in the network detects its Bluetooth signal. Apple says the network can draw on more than a billion iPhones, iPads and Macs. Find My shows each location with the time it was recorded, so you can see how fresh it is.

How does AirTag Precision Finding work?

The AirTag’s Ultra Wideband chip and the one in a recent iPhone measure the exact distance and direction between them. The phone shows that as an arrow and a distance on screen.

How accurate is an AirTag?

On the map, an AirTag appears where a device in the Find My network detected its signal. Once you are close, Precision Finding on a recent iPhone leads you to it with the distance and direction, and can add an arrow to follow and a note if the AirTag is on a different floor. You can also play a sound on the AirTag and find it by ear.

How long does an AirTag battery last?

More than a year with everyday use. It takes a standard CR2032 coin cell that you change yourself by pressing and turning the steel cover.

Can someone else see where my AirTag is?

Only the owner sees its location. Every report is end-to-end encrypted, and the phones that relay it never learn whose AirTag they heard.

What is inside an AirTag?

A white case over a plastic body that doubles as the speaker, a steel cover, a CR2032 battery, a ring-shaped logic board with a Bluetooth chip, an Ultra Wideband chip, an accelerometer and memory, a voice coil and magnet, an NFC coil and antennas.

Is an AirTag water resistant?

Yes. It is rated IP67, which means it can stay under a meter of water for up to 30 minutes.

Will I know if an AirTag is tracking me?

Yes. If an AirTag that is not yours travels with you, your iPhone or Android phone notices and sends you an alert. You can tap the alert to play a sound on the AirTag or find it nearby, and any AirTag separated from its owner for a while makes a sound when it moves.

Does an AirTag work with Android?

An AirTag is set up from an iPhone or iPad and followed in Apple’s Find My app. Android phones work with it in two ways: an Android phone alerts its owner if an unknown AirTag is traveling with them, and any smartphone with NFC can tap an AirTag in Lost Mode to see the owner’s contact details.

Can you track luggage with an AirTag?

Yes. Slip an AirTag into a bag and it shows up in the Find My app with your other items, and if the bag goes missing you can share its location with more than 50 airlines, including Delta, Lufthansa, Singapore Airlines and United. Sharing ends by itself when you have the bag back, or after seven days.

Do you charge an AirTag?

No. An AirTag runs on a standard CR2032 coin cell that Apple rates for more than a year of everyday use, and your iPhone alerts you when it is time for a new one. Press the steel cover, turn it, drop in a fresh cell and you are done.

What is new in the second-generation AirTag?

The AirTag (2nd generation), released in January 2026, has Apple’s second-generation Ultra Wideband chip, giving up to 1.5 times the Precision Finding range. Its speaker is 50 percent louder, so you can hear it from up to twice as far away. It keeps the CR2032 battery and the IP67 water rating.

Sources

Make it yours

Engrave your name, your initials or your logo on the AirTag’s steel back, choose a finish and a color, and share your version with one link. Whoever opens it can look inside and hear it play.

  1. 1Type your name, or a website and we find its logo
  2. 2Pick the engraving style, the finish and the color
  3. 3Share your link, a picture or a short video

Made with Proofscene

This page runs on the 3D technology we use to build interactive product demos for manufacturers: built from CAD, running in any browser, on their own website.

Interactive 3D product demos