iPhone 17 Pro in interactive 3D
Loading the 3D iPhone 17 Pro

See InsidePhonesUpdated

What’s inside an iPhone 17 Pro?

Inside an iPhone 17 Pro, behind the screen and within one piece of aluminum, sit a main board carrying the A19 Pro chip, a vapor chamber that pulls heat away from it, a battery in its own metal tray and three 48MP cameras under the plateau on the back. Turn the phone, X-ray it and take it apart above.

The 20-second film, with sound

How it works, step by step

Follow the iPhone 17 Pro from the outside in. Each step is something you can see happen in the 3D view above.

  1. One piece of aluminum

    The frame and back are a single piece of aluminum, called a unibody. Aluminum carries heat away far better than the titanium of the two Pro models before it.

  2. The A19 Pro chip

    The phone’s brain sits on the main board: a six-core processor, a six-core graphics chip with Neural Accelerators and a 16-core Neural Engine. It runs everything from games to the camera’s photo processing.

  3. A vapor chamber

    Above the chip sits a thin sealed chamber with deionized water inside, laser-welded into the aluminum. The water turns to vapor at the hot spot, spreads out and condenses on cooler metal, carrying the heat into the whole body.

  4. A battery in a tray

    The battery is held in a metal tray that screws into the phone. Its adhesive lets go with a small electric current, so a new battery goes in cleanly.

  5. Three 48MP cameras

    The main, ultra wide and telephoto cameras all use 48 megapixel sensors. The telephoto folds light through a prism, called a tetraprism, so a long 4x lens fits inside a thin phone.

  6. Wireless and sensors

    Apple’s own N1 chip runs Wi-Fi 7, Bluetooth 6 and Thread. Face ID, a LiDAR scanner and a second-generation Ultra Wideband chip complete the picture.

The parts inside the iPhone 17 Pro

Aluminum unibody
Frame and back in one piece, the path that spreads heat away from the chip.
Ceramic Shield 2 front
The cover glass over the 6.3-inch display.
ProMotion display
A 6.3-inch OLED screen that refreshes up to 120 times a second.
A19 Pro chip
Six-core processor, six-core graphics and a 16-core Neural Engine on the main board.
Vapor chamber
A sealed copper chamber of deionized water that spreads the chip’s heat.
Battery and tray
Rated for up to 31 hours of video, held in a screwed-in metal tray.
48MP Fusion cameras
Main at 24 mm, Ultra Wide at 13 mm and a 4x Telephoto at 100 mm.
18MP Center Stage camera
The front camera, behind the Dynamic Island with Face ID.
N1 wireless chip
Wi-Fi 7, Bluetooth 6 and Thread in one Apple-designed chip.
MagSafe coil
Wireless charging up to 25 watts through the back.
USB-C port
USB 3 data at up to 10 gigabits a second.
Camera Control and Action button
Two side buttons: one for the camera, one you set to anything.

iPhone 17 Pro questions

Straight answers about the iPhone 17 Pro and what happens inside it.

See inside more products
What’s inside an iPhone 17 Pro?

An aluminum unibody holding a 6.3-inch display, a main board with the A19 Pro chip, a vapor chamber that cools it, a battery in a screwed-in metal tray, three 48MP rear cameras, an 18MP front camera, Face ID, a MagSafe coil and Apple’s N1 wireless chip.

Does the iPhone 17 Pro have a vapor chamber?

Yes. A sealed chamber with deionized water inside is laser-welded into the aluminum unibody above the A19 Pro chip. It spreads the chip’s heat across the whole body, so the phone stays fast for longer under load.

Why is the iPhone 17 Pro made of aluminum instead of titanium?

Aluminum conducts heat much better than titanium, so the unibody works with the vapor chamber to move heat away from the chip. The iPhone 15 Pro and iPhone 16 Pro used titanium frames.

What chip is in the iPhone 17 Pro?

The A19 Pro. It has a six-core CPU with two performance and four efficiency cores, a six-core GPU with Neural Accelerators and a 16-core Neural Engine.

How many cameras does the iPhone 17 Pro have?

Four. Three 48MP cameras on the back (Fusion Main at 24 mm, Ultra Wide at 13 mm and a 4x Telephoto at 100 mm) and an 18MP Center Stage camera on the front. Together the back cameras reach up to 8x optical-quality zoom.

Is the iPhone 17 Pro battery easy to replace?

It is easier than on earlier models. The battery sits in a metal tray that screws into the phone, and its adhesive releases with a small electric current, so a repair shop can swap it cleanly.

How long does the iPhone 17 Pro battery last?

Apple rates the iPhone 17 Pro for up to 31 hours of video playback on a full charge.

Is the iPhone 17 Pro easy to repair?

Fairly easy. iFixit gave the iPhone 17 Pro a provisional repairability score of 7 out of 10. Its battery sits in a metal tray held by fourteen Torx Plus screws, and the adhesive under it lets go when 12 volts are applied, so the battery comes out cleanly.

How much does the iPhone 17 Pro vapor chamber help?

Apple says the vapor chamber helps the A19 Pro deliver up to 40 percent better sustained performance than the previous generation. In iFixit’s heat test, the iPhone 16 Pro Max began to slow down once its external temperature hit 100 °F, while the iPhone 17 Pro held a steady 94.6 °F.

What is the difference between the iPhone 17 Pro and 17 Pro Max inside?

The iPhone 17 Pro and 17 Pro Max share the A19 Pro chip, the vapor chamber cooling and the three 48MP rear cameras. The Pro Max is the bigger phone, with a 6.9-inch display instead of 6.3 inches, and Apple rates it for up to 37 hours of video playback against 31 for the Pro.

Make it yours

Engrave your name or your company’s logo on the back, choose a finish and a color, and share your iPhone with one link. Whoever opens it gets your phone in 3D and can take it apart too.

  1. 1Type your name, or a website and we find its logo
  2. 2Pick the engraving style, the finish and the color
  3. 3Share your link, a picture or a short video

Made with Proofscene

This page runs on the 3D technology we use to build interactive product demos for manufacturers: built from CAD, running in any browser, on their own website.

Interactive 3D product demos